United States (US) dollar
Russian ruble
Alstickers! Nurburgring 3D Aluminum-polyurethane car sticker glossy, size 2.56″x1.50″ (65×38 mm), thickness 0.02″ (0.5 mm).
$12.13
4 in stock
Related products
Alstickers! 30 Years Warranty! Old Logo Volvo Glossy Aluminum-Polyurethane car 3D Sticker Size 3.8″x1.93″ (97×49 mm), Thickness 0.02″.
Alstickers! 30 Years Warranty! Old Logo Volvo Glossy Aluminum-Polyurethane car 3D Sticker Size 3.8″x1.93″ (97×49 mm), Thickness 0.02″. $11.14
Alstickers! 30 Years Warranty! Old Logo Volvo Glossy Aluminum-Polyurethane car 3D Sticker Size 3.8″x1.93″ (97×49 mm), Thickness 0.02″.
Alstickers! 30 Years Warranty! Old Logo Volvo Glossy Aluminum-Polyurethane car 3D Sticker Size 3.8″x1.93″ (97×49 mm), Thickness 0.02″. $11.14OLD LOGO VOLVO glossy aluminum-polyurethane 3D car sticker size 3.8″x1.93″ (97×49 mm), thickness 0.02″. (0.5 mm). Image warranty 30 years in corrosive environment and climatic conditions including UV light. On the reverse side applied with 3M 468MP adhesive tape. Attention! Glue only at positive temperature (not less than +10 C), on a dry, clean and degreased surface.
Alstickers! SHARK set 2 pieces car stickers, polyurethane on the metalic film 2.83″X2.32″ (72×59 mm), blue.
Alstickers! SHARK set 2 pieces car stickers, polyurethane on the metalic film 2.83″X2.32″ (72×59 mm), blue. $13.62
Alstickers! SHARK set 2 pieces car stickers, polyurethane on the metalic film 2.83″X2.32″ (72×59 mm), blue.
Alstickers! SHARK set 2 pieces car stickers, polyurethane on the metalic film 2.83″X2.32″ (72×59 mm), blue. $13.62| Set of 2 pieces! The image is made on a high-quality metallized film and coated with polyurethane resin to protect against mechanical and chemical influences. Instructions for gluing and storing the polymer-coated logo. 1. To improve the reliability of bonding of emblems you need to meet the following conditions: a) the surface temperature of bonding must not be below +68°F (+20°C )(in some cases, when the emblem is glued on a metal surface or roughness, or powder paint and the like, the temperature of the surface bonding is advisable to bring to +73.4°F (+23°C), for example, a household dryer. b) the adhesive layer of the emblem at the time of gluing must have a temperature not lower than + 73.4°F (+23°C) (this is a necessary temperature condition; the emblem must be kept to this recommended temperature before gluing to increase the plasticity of the adhesive layer in order to increase the reliability of gluing to the surface). c) the product with the pasted logo must be kept at a temperature not lower than + 64.4°F (+18°C) within 12 hours. 2. The envelope with the logo, which was transported in sub-zero temperatures, it is necessary to unpack not earlier than 24 hours after finding them in a heated room with a temperature below +64,4°F (18°C). 3. The surface to which is glued the logo should be degreased, dry, smooth, clean and not spherical. Sticking the logo on a rough surface reduces the adhesion of the logo. 4. before sticking the self-adhesive logo, it should be separated from the substrate. The adhesive base of the logo must not come into contact with other surfaces (fingers, objects, etc.) after being removed from the substrate. Please do not re-glue the logo, the adhesive strength drops dramatically. 5. storage conditions for emblems: a) room temperature from +50°F (+10°C) to +95°F (+35°C); b) relative humidity 25-70%; c) the warranty period of storage and operation is 12 months. |
Alstickers! CROSS COUNTRY car sticker polyurethane resin metal film size 6.61 x0. 5inch. (168×12. 7mm).
Alstickers! CROSS COUNTRY car sticker polyurethane resin metal film size 6.61 x0. 5inch. (168×12. 7mm). $5.94
Alstickers! CROSS COUNTRY car sticker polyurethane resin metal film size 6.61 x0. 5inch. (168×12. 7mm).
Alstickers! CROSS COUNTRY car sticker polyurethane resin metal film size 6.61 x0. 5inch. (168×12. 7mm). $5.94| Set of 2 pieces! The image is made on a high-quality metallized film and coated with polyurethane resin to protect against mechanical and chemical influences. Instructions for gluing and storing the polymer-coated logo. 1. To improve the reliability of bonding of emblems you need to meet the following conditions: a) the surface temperature of bonding must not be below +68°F (+20°C )(in some cases, when the emblem is glued on a metal surface or roughness, or powder paint and the like, the temperature of the surface bonding is advisable to bring to +73.4°F (+23°C), for example, a household dryer. b) the adhesive layer of the emblem at the time of gluing must have a temperature not lower than + 73.4°F (+23°C) (this is a necessary temperature condition; the emblem must be kept to this recommended temperature before gluing to increase the plasticity of the adhesive layer in order to increase the reliability of gluing to the surface). c) the product with the pasted logo must be kept at a temperature not lower than + 64.4°F (+18°C) within 12 hours. 2. The envelope with the logo, which was transported in sub-zero temperatures, it is necessary to unpack not earlier than 24 hours after finding them in a heated room with a temperature below +64,4°F (18°C). 3. The surface to which is glued the logo should be degreased, dry, smooth, clean and not spherical. Sticking the logo on a rough surface reduces the adhesion of the logo. 4. before sticking the self-adhesive logo, it should be separated from the substrate. The adhesive base of the logo must not come into contact with other surfaces (fingers, objects, etc.) after being removed from the substrate. Please do not re-glue the logo, the adhesive strength drops dramatically. 5. storage conditions for emblems: a) room temperature from +50°F (+10°C) to +95°F (+35°C); b) relative humidity 25-70%; c) the warranty period of storage and operation is 12 months. |
Alstickers! RICA 3D Aluminum-polyurethane car sticker glossy, size 3.94″x0.79″ (100×20 mm), thickness 0.02″ (0.5 mm).
Alstickers! RICA 3D Aluminum-polyurethane car sticker glossy, size 3.94″x0.79″ (100×20 mm), thickness 0.02″ (0.5 mm). $5.94
Reviews
There are no reviews yet.