Alstickers! AC SCHNITZER , car sticker, metallized film coated with polyurethane resin, size 5.21×1.50 inch. (132,2×38 mm).
Alstickers! AC SCHNITZER , car sticker, metallized film coated with polyurethane resin, size 5.21×1.50 inch. (132,2×38 mm). ₽ 780.00
-
₽ 780.00Add to cart
Alstickers! AC SCHNITZER , car sticker, metallized film coated with polyurethane resin, size 5.21×1.50 inch. (132,2×38 mm).
Alstickers! AC SCHNITZER , car sticker, metallized film coated with polyurethane resin, size 5.21×1.50 inch. (132,2×38 mm). ₽ 780.00The image is made on a high-quality metallized film and coated with polyurethane resin to protect against mechanical and chemical influences. Size 2.34×1.00 inch. (59,5×25.4 mm)! Instructions for gluing and storing the polymer-coated logo. 1. To improve the reliability of bonding of emblems you need to meet the following conditions: a) the surface temperature of bonding must not be below +68°F (+20°C )(in some cases, when the emblem is glued on a metal surface or roughness, or powder paint and the like, the temperature of the surface bonding is advisable to bring to +73.4°F (+23°C), for example, a household dryer. b) the adhesive layer of the emblem at the time of gluing must have a temperature not lower than + 73.4°F (+23°C) (this is a necessary temperature condition; the emblem must be kept to this recommended temperature before gluing to increase the plasticity of the adhesive layer in order to increase the reliability of gluing to the surface). c) the product with the pasted logo must be kept at a temperature not lower than + 64.4°F (+18°C) within 12 hours. 2. The envelope with the logo, which was transported in sub-zero temperatures, it is necessary to unpack not earlier than 24 hours after finding them in a heated room with a temperature below +64,4°F (18°C). 3. The surface to which is glued the logo should be degreased, dry, smooth, clean and not spherical. Sticking the logo on a rough surface reduces the adhesion of the logo. 4. before sticking the self-adhesive logo, it should be separated from the substrate. The adhesive base of the logo must not come into contact with other surfaces (fingers, objects, etc.) after being removed from the substrate. Please do not re-glue the logo, the adhesive strength drops dramatically. 5. storage conditions for emblems: a) room temperature from +50°F (+10°C) to +95°F (+35°C); b) relative humidity 25-70%; c) the warranty period of storage and operation is 12 months. |
Alstickers! Set 2 pcs! Hockey Edition Skoda , car stickers, metallized film coated with polyurethane resin, size 4.29×1.28 inch. (109×32,5 mm).
Alstickers! Set 2 pcs! Hockey Edition Skoda , car stickers, metallized film coated with polyurethane resin, size 4.29×1.28 inch. (109×32,5 mm). ₽ 980.00
-
₽ 980.00Add to cart
Alstickers! Set 2 pcs! Hockey Edition Skoda , car stickers, metallized film coated with polyurethane resin, size 4.29×1.28 inch. (109×32,5 mm).
Alstickers! Set 2 pcs! Hockey Edition Skoda , car stickers, metallized film coated with polyurethane resin, size 4.29×1.28 inch. (109×32,5 mm). ₽ 980.00The image is made on a high-quality metallized film and coated with polyurethane resin to protect against mechanical and chemical influences. Size 2.34×1.00 inch. (59,5×25.4 mm)! Instructions for gluing and storing the polymer-coated logo. 1. To improve the reliability of bonding of emblems you need to meet the following conditions: a) the surface temperature of bonding must not be below +68°F (+20°C )(in some cases, when the emblem is glued on a metal surface or roughness, or powder paint and the like, the temperature of the surface bonding is advisable to bring to +73.4°F (+23°C), for example, a household dryer. b) the adhesive layer of the emblem at the time of gluing must have a temperature not lower than + 73.4°F (+23°C) (this is a necessary temperature condition; the emblem must be kept to this recommended temperature before gluing to increase the plasticity of the adhesive layer in order to increase the reliability of gluing to the surface). c) the product with the pasted logo must be kept at a temperature not lower than + 64.4°F (+18°C) within 12 hours. 2. The envelope with the logo, which was transported in sub-zero temperatures, it is necessary to unpack not earlier than 24 hours after finding them in a heated room with a temperature below +64,4°F (18°C). 3. The surface to which is glued the logo should be degreased, dry, smooth, clean and not spherical. Sticking the logo on a rough surface reduces the adhesion of the logo. 4. before sticking the self-adhesive logo, it should be separated from the substrate. The adhesive base of the logo must not come into contact with other surfaces (fingers, objects, etc.) after being removed from the substrate. Please do not re-glue the logo, the adhesive strength drops dramatically. 5. storage conditions for emblems: a) room temperature from +50°F (+10°C) to +95°F (+35°C); b) relative humidity 25-70%; c) the warranty period of storage and operation is 12 months. |
Alstickers! YAMAHA car Sticker, polyurethane resin, metal film. size 2.76 inch. (70 mm).
Alstickers! YAMAHA car Sticker, polyurethane resin, metal film. size 2.76 inch. (70 mm). ₽ 780.00
-
₽ 780.00Add to cart
Alstickers! YAMAHA car Sticker, polyurethane resin, metal film. size 2.76 inch. (70 mm).
Alstickers! YAMAHA car Sticker, polyurethane resin, metal film. size 2.76 inch. (70 mm). ₽ 780.00The image is made on a high-quality metallized film and coated with polyurethane resin to protect against mechanical and chemical influences. Size 2.44×0.59 inch. (62×15 mm)! Instructions for gluing and storing the polymer-coated logo. 1. To improve the reliability of bonding of emblems you need to meet the following conditions: a) the surface temperature of bonding must not be below +68°F (+20°C )(in some cases, when the emblem is glued on a metal surface or roughness, or powder paint and the like, the temperature of the surface bonding is advisable to bring to +73.4°F (+23°C), for example, a household dryer. b) the adhesive layer of the emblem at the time of gluing must have a temperature not lower than + 73.4°F (+23°C) (this is a necessary temperature condition; the emblem must be kept to this recommended temperature before gluing to increase the plasticity of the adhesive layer in order to increase the reliability of gluing to the surface). c) the product with the pasted logo must be kept at a temperature not lower than + 64.4°F (+18°C) within 12 hours. 2. The envelope with the logo, which was transported in sub-zero temperatures, it is necessary to unpack not earlier than 24 hours after finding them in a heated room with a temperature below +64,4°F (18°C). 3. The surface to which is glued the logo should be degreased, dry, smooth, clean and not spherical. Sticking the logo on a rough surface reduces the adhesion of the logo. 4. before sticking the self-adhesive logo, it should be separated from the substrate. The adhesive base of the logo must not come into contact with other surfaces (fingers, objects, etc.) after being removed from the substrate. Please do not re-glue the logo, the adhesive strength drops dramatically. 5. storage conditions for emblems: a) room temperature from +50°F (+10°C) to +95°F (+35°C); b) relative humidity 25-70%; c) the warranty period of storage and operation is 12 months. |
Alstickers! 30 Years Warranty! 3D Aluminum-Polyurethane car Sticker POLESTAR Satin, Size 2″x2″ (51×51 mm), Thickness 0.02″ (0.5 mm). (Silver)
Alstickers! 30 Years Warranty! 3D Aluminum-Polyurethane car Sticker POLESTAR Satin, Size 2″x2″ (51×51 mm), Thickness 0.02″ (0.5 mm). (Silver) ₽ 750.00
-
₽ 750.00Add to cart
Alstickers! 30 Years Warranty! 3D Aluminum-Polyurethane car Sticker POLESTAR Satin, Size 2″x2″ (51×51 mm), Thickness 0.02″ (0.5 mm). (Silver)
Alstickers! 30 Years Warranty! 3D Aluminum-Polyurethane car Sticker POLESTAR Satin, Size 2″x2″ (51×51 mm), Thickness 0.02″ (0.5 mm). (Silver) ₽ 750.00Alstickers! 30 years warranty! POLESTAR satin aluminum-polyurethane 3D car sticker. Attantion!!! Size!!! 2″x2″ (51×51 mm), thickness 0.02” (0.5 mm). Image warranty 30 years in corrosive environment and climatic conditions including UV light. On the reverse side applied with 3M 468MP adhesive tape. Coating with polyurethane resin to protect the glossy surface of the aluminum from scratches. Attention! Glue only at positive temperature (not less than +10 C), on a dry, clean and degreased surface.
Alstickers! 30 Years Warranty! Aluminum car Stickers HOFELE Set 4 Pieces Satin, Size 2.52″ (64 mm), Thickness 0.03″ (0.8 mm).
Alstickers! 30 Years Warranty! Aluminum car Stickers HOFELE Set 4 Pieces Satin, Size 2.52″ (64 mm), Thickness 0.03″ (0.8 mm). ₽ 1868.00
-
₽ 1868.00Add to cart
Alstickers! 30 Years Warranty! Aluminum car Stickers HOFELE Set 4 Pieces Satin, Size 2.52″ (64 mm), Thickness 0.03″ (0.8 mm).
Alstickers! 30 Years Warranty! Aluminum car Stickers HOFELE Set 4 Pieces Satin, Size 2.52″ (64 mm), Thickness 0.03″ (0.8 mm). ₽ 1868.00Set of 4 pieces! HOFELE Satin aluminum car stickers. Size!!! 2.52″ (64mm), thickness 0,03” (0,8 mm). Image warranty 30 years in corrosive environment and climatic conditions including UV light. On the reverse side applied with 3M 468MP adhesive tape. Attention! Glue only at positive temperature (not less than +10 C), on a dry, clean and degreased surface.
Alstickers! ABARTH car sticker, polyurethane resin, metal film. Size 2. 74×2. 52 inch. (69. 5×64 mm).
Alstickers! ABARTH car sticker, polyurethane resin, metal film. Size 2. 74×2. 52 inch. (69. 5×64 mm). ₽ 780.00
-
₽ 780.00Add to cart
Alstickers! ABARTH car sticker, polyurethane resin, metal film. Size 2. 74×2. 52 inch. (69. 5×64 mm).
Alstickers! ABARTH car sticker, polyurethane resin, metal film. Size 2. 74×2. 52 inch. (69. 5×64 mm). ₽ 780.00The image is made on a high-quality metallized film and coated with polyurethane resin to protect against mechanical and chemical influences. Instructions for gluing and storing the polymer-coated logo. 1. To improve the reliability of bonding of emblems you need to meet the following conditions: a) the surface temperature of bonding must not be below +68°F (+20°C )(in some cases, when the emblem is glued on a metal surface or roughness, or powder paint and the like, the temperature of the surface bonding is advisable to bring to +73.4°F (+23°C), for example, a household dryer. b) the adhesive layer of the emblem at the time of gluing must have a temperature not lower than + 73.4°F (+23°C) (this is a necessary temperature condition; the emblem must be kept to this recommended temperature before gluing to increase the plasticity of the adhesive layer in order to increase the reliability of gluing to the surface). c) the product with the pasted logo must be kept at a temperature not lower than + 64.4°F (+18°C) within 12 hours. 2. The envelope with the logo, which was transported in sub-zero temperatures, it is necessary to unpack not earlier than 24 hours after finding them in a heated room with a temperature below +64,4°F (18°C). 3. The surface to which is glued the logo should be degreased, dry, smooth, clean and not spherical. Sticking the logo on a rough surface reduces the adhesion of the logo. 4. before sticking the self-adhesive logo, it should be separated from the substrate. The adhesive base of the logo must not come into contact with other surfaces (fingers, objects, etc.) after being removed from the substrate. Please do not re-glue the logo, the adhesive strength drops dramatically. 5. storage conditions for emblems: a) room temperature from +50°F (+10°C) to +95°F (+35°C); b) relative humidity 25-70%; c) the warranty period of storage and operation is 12 months.
Alstickers! Aluminum-Polyurethane car Sticker HOFELE Design Glossy Size 2.75″x2.0″ (70×51 mm) Thickness 0.02″
Alstickers! Aluminum-Polyurethane car Sticker HOFELE Design Glossy Size 2.75″x2.0″ (70×51 mm) Thickness 0.02″ ₽ 900.00
-
₽ 900.00Add to cart
Alstickers! Aluminum-Polyurethane car Sticker HOFELE Design Glossy Size 2.75″x2.0″ (70×51 mm) Thickness 0.02″
Alstickers! Aluminum-Polyurethane car Sticker HOFELE Design Glossy Size 2.75″x2.0″ (70×51 mm) Thickness 0.02″ ₽ 900.00Aluminum-polyurethane car sticker HOFELE glossy, size 2.75″x2.0″ (70×51 mm) thickness 0.02″. Image warranty 30 years in corrosive environment and climatic conditions including UV light. On the reverse side applied with 3M 468MP adhesive tape. Attention! Glue only at positive temperature (not less than +10), on a dry, clean and degreased surface.
Alstickers! BSR car sticker, polyurethane resin film 2.74″X0.43″ (69,5×11 mm)
Alstickers! BSR car sticker, polyurethane resin film 2.74″X0.43″ (69,5×11 mm) ₽ 400.00
-
₽ 400.00Add to cart
Alstickers! BSR car sticker, polyurethane resin film 2.74″X0.43″ (69,5×11 mm)
Alstickers! BSR car sticker, polyurethane resin film 2.74″X0.43″ (69,5×11 mm) ₽ 400.00The image is made on a film of high quality and filled with polyurethane resin for protection against mechanical and chemical influences.You can purchase a sticker with the inscription or no inscription.The amount of 2.74 x 0.43 inch (69,5 x 11mm) !!! Attention!!!Gluing only at positive temperatures (+10 C), to dry, clean and degreased surface. |
Alstickers! BSR car sticker, polyurethane resin film 3.13″X0.50″ (79,5×12,6 mm)
Alstickers! BSR car sticker, polyurethane resin film 3.13″X0.50″ (79,5×12,6 mm) ₽ 500.00
-
₽ 500.00Add to cart
Alstickers! BSR car sticker, polyurethane resin film 3.13″X0.50″ (79,5×12,6 mm)
Alstickers! BSR car sticker, polyurethane resin film 3.13″X0.50″ (79,5×12,6 mm) ₽ 500.00The image is made on a film of high quality and filled with polyurethane resin for protection against mechanical and chemical influences.You can purchase a sticker with the inscription or no inscription.The amount of 3.13×0.50 inch (79,5×12,6 mm) !!! Attention!!!Gluing only at positive temperatures (+10 C), to dry, clean and degreased surface. |
Alstickers! COLNAGO car sticker, polyurethane resin, metal film. size 2. 62×1. 85 inch. (66. 5×47. 1 mm).
Alstickers! COLNAGO car sticker, polyurethane resin, metal film. size 2. 62×1. 85 inch. (66. 5×47. 1 mm). ₽ 380.00
-
₽ 380.00Add to cart
Alstickers! COLNAGO car sticker, polyurethane resin, metal film. size 2. 62×1. 85 inch. (66. 5×47. 1 mm).
Alstickers! COLNAGO car sticker, polyurethane resin, metal film. size 2. 62×1. 85 inch. (66. 5×47. 1 mm). ₽ 380.00The image is made on a high-quality metallized film and coated with polyurethane resin to protect against mechanical and chemical influences. Size 2.44×0.59 inch. (62×15 mm)! Instructions for gluing and storing the polymer-coated logo. 1. To improve the reliability of bonding of emblems you need to meet the following conditions: a) the surface temperature of bonding must not be below +68°F (+20°C )(in some cases, when the emblem is glued on a metal surface or roughness, or powder paint and the like, the temperature of the surface bonding is advisable to bring to +73.4°F (+23°C), for example, a household dryer. b) the adhesive layer of the emblem at the time of gluing must have a temperature not lower than + 73.4°F (+23°C) (this is a necessary temperature condition; the emblem must be kept to this recommended temperature before gluing to increase the plasticity of the adhesive layer in order to increase the reliability of gluing to the surface). c) the product with the pasted logo must be kept at a temperature not lower than + 64.4°F (+18°C) within 12 hours. 2. The envelope with the logo, which was transported in sub-zero temperatures, it is necessary to unpack not earlier than 24 hours after finding them in a heated room with a temperature below +64,4°F (18°C). 3. The surface to which is glued the logo should be degreased, dry, smooth, clean and not spherical. Sticking the logo on a rough surface reduces the adhesion of the logo. 4. before sticking the self-adhesive logo, it should be separated from the substrate. The adhesive base of the logo must not come into contact with other surfaces (fingers, objects, etc.) after being removed from the substrate. Please do not re-glue the logo, the adhesive strength drops dramatically. 5. storage conditions for emblems: a) room temperature from +50°F (+10°C) to +95°F (+35°C); b) relative humidity 25-70%; c) the warranty period of storage and operation is 12 months. |
Alstickers! COLNAGO car sticker, polyurethane resin, metal film. size 4. 66×3. 31 inch. (118. 3×84 mm).
Alstickers! COLNAGO car sticker, polyurethane resin, metal film. size 4. 66×3. 31 inch. (118. 3×84 mm). ₽ 780.00
-
₽ 780.00Add to cart
Alstickers! COLNAGO car sticker, polyurethane resin, metal film. size 4. 66×3. 31 inch. (118. 3×84 mm).
Alstickers! COLNAGO car sticker, polyurethane resin, metal film. size 4. 66×3. 31 inch. (118. 3×84 mm). ₽ 780.00The image is made on a high-quality metallized film and coated with polyurethane resin to protect against mechanical and chemical influences. Size 2.44×0.59 inch. (62×15 mm)! Instructions for gluing and storing the polymer-coated logo. 1. To improve the reliability of bonding of emblems you need to meet the following conditions: a) the surface temperature of bonding must not be below +68°F (+20°C )(in some cases, when the emblem is glued on a metal surface or roughness, or powder paint and the like, the temperature of the surface bonding is advisable to bring to +73.4°F (+23°C), for example, a household dryer. b) the adhesive layer of the emblem at the time of gluing must have a temperature not lower than + 73.4°F (+23°C) (this is a necessary temperature condition; the emblem must be kept to this recommended temperature before gluing to increase the plasticity of the adhesive layer in order to increase the reliability of gluing to the surface). c) the product with the pasted logo must be kept at a temperature not lower than + 64.4°F (+18°C) within 12 hours. 2. The envelope with the logo, which was transported in sub-zero temperatures, it is necessary to unpack not earlier than 24 hours after finding them in a heated room with a temperature below +64,4°F (18°C). 3. The surface to which is glued the logo should be degreased, dry, smooth, clean and not spherical. Sticking the logo on a rough surface reduces the adhesion of the logo. 4. before sticking the self-adhesive logo, it should be separated from the substrate. The adhesive base of the logo must not come into contact with other surfaces (fingers, objects, etc.) after being removed from the substrate. Please do not re-glue the logo, the adhesive strength drops dramatically. 5. storage conditions for emblems: a) room temperature from +50°F (+10°C) to +95°F (+35°C); b) relative humidity 25-70%; c) the warranty period of storage and operation is 12 months. |
Alstickers! For Heico set 2 pieces, 3D stickers on the fender of the car, polyurethane on the metalic film 2.68″ (68 mm).
Alstickers! For Heico set 2 pieces, 3D stickers on the fender of the car, polyurethane on the metalic film 2.68″ (68 mm). ₽ 1100.00
-
₽ 1100.00Add to cart
Alstickers! For Heico set 2 pieces, 3D stickers on the fender of the car, polyurethane on the metalic film 2.68″ (68 mm).
Alstickers! For Heico set 2 pieces, 3D stickers on the fender of the car, polyurethane on the metalic film 2.68″ (68 mm). ₽ 1100.00Set of 2 pieces! The image is made on a high-quality metallized film and coated with polyurethane resin to protect against mechanical and chemical influences. Instructions for gluing and storing the polymer-coated logo. 1. To improve the reliability of bonding of emblems you need to meet the following conditions: a) the surface temperature of bonding must not be below +68°F (+20°C )(in some cases, when the emblem is glued on a metal surface or roughness, or powder paint and the like, the temperature of the surface bonding is advisable to bring to +73.4°F (+23°C), for example, a household dryer. b) the adhesive layer of the emblem at the time of gluing must have a temperature not lower than + 73.4°F (+23°C) (this is a necessary temperature condition; the emblem must be kept to this recommended temperature before gluing to increase the plasticity of the adhesive layer in order to increase the reliability of gluing to the surface). c) the product with the pasted logo must be kept at a temperature not lower than + 64.4°F (+18°C) within 12 hours. 2. The envelope with the logo, which was transported in sub-zero temperatures, it is necessary to unpack not earlier than 24 hours after finding them in a heated room with a temperature below +64,4°F (18°C). 3. The surface to which is glued the logo should be degreased, dry, smooth, clean and not spherical. Sticking the logo on a rough surface reduces the adhesion of the logo. 4. before sticking the self-adhesive logo, it should be separated from the substrate. The adhesive base of the logo must not come into contact with other surfaces (fingers, objects, etc.) after being removed from the substrate. Please do not re-glue the logo, the adhesive strength drops dramatically. 5. storage conditions for emblems: a) room temperature from +50°F (+10°C) to +95°F (+35°C); b) relative humidity 25-70%; c) the warranty period of storage and operation is 12 months. |