Alstickers! AC SCHNITZER , car sticker, metallized film coated with polyurethane resin, size 5.21×1.50 inch. (132,2×38 mm).
Alstickers! AC SCHNITZER , car sticker, metallized film coated with polyurethane resin, size 5.21×1.50 inch. (132,2×38 mm). ₽ 780.00
-
₽ 780.00Add to cart
Alstickers! AC SCHNITZER , car sticker, metallized film coated with polyurethane resin, size 5.21×1.50 inch. (132,2×38 mm).
Alstickers! AC SCHNITZER , car sticker, metallized film coated with polyurethane resin, size 5.21×1.50 inch. (132,2×38 mm). ₽ 780.00The image is made on a high-quality metallized film and coated with polyurethane resin to protect against mechanical and chemical influences. Size 2.34×1.00 inch. (59,5×25.4 mm)! Instructions for gluing and storing the polymer-coated logo. 1. To improve the reliability of bonding of emblems you need to meet the following conditions: a) the surface temperature of bonding must not be below +68°F (+20°C )(in some cases, when the emblem is glued on a metal surface or roughness, or powder paint and the like, the temperature of the surface bonding is advisable to bring to +73.4°F (+23°C), for example, a household dryer. b) the adhesive layer of the emblem at the time of gluing must have a temperature not lower than + 73.4°F (+23°C) (this is a necessary temperature condition; the emblem must be kept to this recommended temperature before gluing to increase the plasticity of the adhesive layer in order to increase the reliability of gluing to the surface). c) the product with the pasted logo must be kept at a temperature not lower than + 64.4°F (+18°C) within 12 hours. 2. The envelope with the logo, which was transported in sub-zero temperatures, it is necessary to unpack not earlier than 24 hours after finding them in a heated room with a temperature below +64,4°F (18°C). 3. The surface to which is glued the logo should be degreased, dry, smooth, clean and not spherical. Sticking the logo on a rough surface reduces the adhesion of the logo. 4. before sticking the self-adhesive logo, it should be separated from the substrate. The adhesive base of the logo must not come into contact with other surfaces (fingers, objects, etc.) after being removed from the substrate. Please do not re-glue the logo, the adhesive strength drops dramatically. 5. storage conditions for emblems: a) room temperature from +50°F (+10°C) to +95°F (+35°C); b) relative humidity 25-70%; c) the warranty period of storage and operation is 12 months. |
Alstickers! ROLLS ROYCE , car sticker, metallized film coated with polyurethane resin, size 2.76×1.58 inch. (70×40 мм).
Alstickers! ROLLS ROYCE , car sticker, metallized film coated with polyurethane resin, size 2.76×1.58 inch. (70×40 мм). ₽ 480.00
-
₽ 480.00Add to cart
Alstickers! ROLLS ROYCE , car sticker, metallized film coated with polyurethane resin, size 2.76×1.58 inch. (70×40 мм).
Alstickers! ROLLS ROYCE , car sticker, metallized film coated with polyurethane resin, size 2.76×1.58 inch. (70×40 мм). ₽ 480.00The image is made on a high-quality metallized film and coated with polyurethane resin to protect against mechanical and chemical influences. Size 2.34×1.00 inch. (59,5×25.4 mm)! Instructions for gluing and storing the polymer-coated logo. 1. To improve the reliability of bonding of emblems you need to meet the following conditions: a) the surface temperature of bonding must not be below +68°F (+20°C )(in some cases, when the emblem is glued on a metal surface or roughness, or powder paint and the like, the temperature of the surface bonding is advisable to bring to +73.4°F (+23°C), for example, a household dryer. b) the adhesive layer of the emblem at the time of gluing must have a temperature not lower than + 73.4°F (+23°C) (this is a necessary temperature condition; the emblem must be kept to this recommended temperature before gluing to increase the plasticity of the adhesive layer in order to increase the reliability of gluing to the surface). c) the product with the pasted logo must be kept at a temperature not lower than + 64.4°F (+18°C) within 12 hours. 2. The envelope with the logo, which was transported in sub-zero temperatures, it is necessary to unpack not earlier than 24 hours after finding them in a heated room with a temperature below +64,4°F (18°C). 3. The surface to which is glued the logo should be degreased, dry, smooth, clean and not spherical. Sticking the logo on a rough surface reduces the adhesion of the logo. 4. before sticking the self-adhesive logo, it should be separated from the substrate. The adhesive base of the logo must not come into contact with other surfaces (fingers, objects, etc.) after being removed from the substrate. Please do not re-glue the logo, the adhesive strength drops dramatically. 5. storage conditions for emblems: a) room temperature from +50°F (+10°C) to +95°F (+35°C); b) relative humidity 25-70%; c) the warranty period of storage and operation is 12 months. |
Alstickers! Set 2 pcs! Hockey Edition Skoda , car stickers, metallized film coated with polyurethane resin, size 4.29×1.28 inch. (109×32,5 mm).
Alstickers! Set 2 pcs! Hockey Edition Skoda , car stickers, metallized film coated with polyurethane resin, size 4.29×1.28 inch. (109×32,5 mm). ₽ 980.00
-
₽ 980.00Add to cart
Alstickers! Set 2 pcs! Hockey Edition Skoda , car stickers, metallized film coated with polyurethane resin, size 4.29×1.28 inch. (109×32,5 mm).
Alstickers! Set 2 pcs! Hockey Edition Skoda , car stickers, metallized film coated with polyurethane resin, size 4.29×1.28 inch. (109×32,5 mm). ₽ 980.00The image is made on a high-quality metallized film and coated with polyurethane resin to protect against mechanical and chemical influences. Size 2.34×1.00 inch. (59,5×25.4 mm)! Instructions for gluing and storing the polymer-coated logo. 1. To improve the reliability of bonding of emblems you need to meet the following conditions: a) the surface temperature of bonding must not be below +68°F (+20°C )(in some cases, when the emblem is glued on a metal surface or roughness, or powder paint and the like, the temperature of the surface bonding is advisable to bring to +73.4°F (+23°C), for example, a household dryer. b) the adhesive layer of the emblem at the time of gluing must have a temperature not lower than + 73.4°F (+23°C) (this is a necessary temperature condition; the emblem must be kept to this recommended temperature before gluing to increase the plasticity of the adhesive layer in order to increase the reliability of gluing to the surface). c) the product with the pasted logo must be kept at a temperature not lower than + 64.4°F (+18°C) within 12 hours. 2. The envelope with the logo, which was transported in sub-zero temperatures, it is necessary to unpack not earlier than 24 hours after finding them in a heated room with a temperature below +64,4°F (18°C). 3. The surface to which is glued the logo should be degreased, dry, smooth, clean and not spherical. Sticking the logo on a rough surface reduces the adhesion of the logo. 4. before sticking the self-adhesive logo, it should be separated from the substrate. The adhesive base of the logo must not come into contact with other surfaces (fingers, objects, etc.) after being removed from the substrate. Please do not re-glue the logo, the adhesive strength drops dramatically. 5. storage conditions for emblems: a) room temperature from +50°F (+10°C) to +95°F (+35°C); b) relative humidity 25-70%; c) the warranty period of storage and operation is 12 months. |
Alstickers! YAMAHA car Sticker, polyurethane resin, metal film. size 2.76 inch. (70 mm).
Alstickers! YAMAHA car Sticker, polyurethane resin, metal film. size 2.76 inch. (70 mm). ₽ 780.00
-
₽ 780.00Add to cart
Alstickers! YAMAHA car Sticker, polyurethane resin, metal film. size 2.76 inch. (70 mm).
Alstickers! YAMAHA car Sticker, polyurethane resin, metal film. size 2.76 inch. (70 mm). ₽ 780.00The image is made on a high-quality metallized film and coated with polyurethane resin to protect against mechanical and chemical influences. Size 2.44×0.59 inch. (62×15 mm)! Instructions for gluing and storing the polymer-coated logo. 1. To improve the reliability of bonding of emblems you need to meet the following conditions: a) the surface temperature of bonding must not be below +68°F (+20°C )(in some cases, when the emblem is glued on a metal surface or roughness, or powder paint and the like, the temperature of the surface bonding is advisable to bring to +73.4°F (+23°C), for example, a household dryer. b) the adhesive layer of the emblem at the time of gluing must have a temperature not lower than + 73.4°F (+23°C) (this is a necessary temperature condition; the emblem must be kept to this recommended temperature before gluing to increase the plasticity of the adhesive layer in order to increase the reliability of gluing to the surface). c) the product with the pasted logo must be kept at a temperature not lower than + 64.4°F (+18°C) within 12 hours. 2. The envelope with the logo, which was transported in sub-zero temperatures, it is necessary to unpack not earlier than 24 hours after finding them in a heated room with a temperature below +64,4°F (18°C). 3. The surface to which is glued the logo should be degreased, dry, smooth, clean and not spherical. Sticking the logo on a rough surface reduces the adhesion of the logo. 4. before sticking the self-adhesive logo, it should be separated from the substrate. The adhesive base of the logo must not come into contact with other surfaces (fingers, objects, etc.) after being removed from the substrate. Please do not re-glue the logo, the adhesive strength drops dramatically. 5. storage conditions for emblems: a) room temperature from +50°F (+10°C) to +95°F (+35°C); b) relative humidity 25-70%; c) the warranty period of storage and operation is 12 months. |
Alstickers! 3 3D aluminum-polyurethane car sticker Skull Harley and Davidson glossy, size 45 mm, thickness 0.5 mm, silver.
Alstickers! 3 3D aluminum-polyurethane car sticker Skull Harley and Davidson glossy, size 45 mm, thickness 0.5 mm, silver. ₽ 700.00
-
₽ 700.00Add to cart
Alstickers! 3 3D aluminum-polyurethane car sticker Skull Harley and Davidson glossy, size 45 mm, thickness 0.5 mm, silver.
Alstickers! 3 3D aluminum-polyurethane car sticker Skull Harley and Davidson glossy, size 45 mm, thickness 0.5 mm, silver. ₽ 700.00Alstickers! 30 30 years warranty! Skull Harley and Davidson glossy aluminum-polyurethane 3D car sticker. Attention!!! Size!!! 45 mm, 0.5 mm thickness. The image is guaranteed for 30 years in aggressive environments and climatic conditions, including ultraviolet radiation. The reverse side is covered with 3M 468mp adhesive tape. Attention! Stick only at a positive temperature of at least +10 C, on a dry, clean and fat-free surface.
Alstickers! 3 3D aluminum-polyurethane car sticker Skull Harley and Davidson glossy, size 45 mm, thickness 0.5 mm, silver. (Copy)
Alstickers! 3 3D aluminum-polyurethane car sticker Skull Harley and Davidson glossy, size 45 mm, thickness 0.5 mm, silver. (Copy) ₽ 700.00
-
₽ 700.00Add to cart
Alstickers! 3 3D aluminum-polyurethane car sticker Skull Harley and Davidson glossy, size 45 mm, thickness 0.5 mm, silver. (Copy)
Alstickers! 3 3D aluminum-polyurethane car sticker Skull Harley and Davidson glossy, size 45 mm, thickness 0.5 mm, silver. (Copy) ₽ 700.00Alstickers! 30 30 years warranty! Skull Harley and Davidson glossy aluminum-polyurethane 3D car sticker. Attention!!! Size!!! 45 mm, 0.5 mm thickness. The image is guaranteed for 30 years in aggressive environments and climatic conditions, including ultraviolet radiation. The reverse side is covered with 3M 468mp adhesive tape. Attention! Stick only at a positive temperature of at least +10 C, on a dry, clean and fat-free surface.
Alstickers! 30 Years Warranty! 3D Aluminum-Polyurethane car Sticker Executive Glossy, Size 4.29″x0.47″ (109×12 mm), Thickness 0.02″ (0.5 mm).
Alstickers! 30 Years Warranty! 3D Aluminum-Polyurethane car Sticker Executive Glossy, Size 4.29″x0.47″ (109×12 mm), Thickness 0.02″ (0.5 mm). ₽ 700.00
-
₽ 700.00Add to cart
Alstickers! 30 Years Warranty! 3D Aluminum-Polyurethane car Sticker Executive Glossy, Size 4.29″x0.47″ (109×12 mm), Thickness 0.02″ (0.5 mm).
Alstickers! 30 Years Warranty! 3D Aluminum-Polyurethane car Sticker Executive Glossy, Size 4.29″x0.47″ (109×12 mm), Thickness 0.02″ (0.5 mm). ₽ 700.00Alstickers! 30 years warranty! EXECUTIVE glossy aluminum-polyurethane 3D car sticker. Attantion!!! Size!!! 4.29″x0.47″ (109×12 mm), thickness 0.02” (0.5 mm). Image warranty 30 years in corrosive environment and climatic conditions including UV light. On the reverse side applied with 3M 468MP adhesive tape. Coating with polyurethane resin to protect the glossy surface of the aluminum from scratches. Attention! Glue only at positive temperature (not less than +10 C), on a dry, clean and degreased surface.
Alstickers! 30 Years Warranty! 3D Aluminum-Polyurethane car Sticker Executive Glossy, Size 4.29″x0.47″ (109×12 mm), Thickness 0.02″ (0.5 mm).
Alstickers! 30 Years Warranty! 3D Aluminum-Polyurethane car Sticker Executive Glossy, Size 4.29″x0.47″ (109×12 mm), Thickness 0.02″ (0.5 mm). ₽ 700.00
-
₽ 700.00Add to cart
Alstickers! 30 Years Warranty! 3D Aluminum-Polyurethane car Sticker Executive Glossy, Size 4.29″x0.47″ (109×12 mm), Thickness 0.02″ (0.5 mm).
Alstickers! 30 Years Warranty! 3D Aluminum-Polyurethane car Sticker Executive Glossy, Size 4.29″x0.47″ (109×12 mm), Thickness 0.02″ (0.5 mm). ₽ 700.00Alstickers! 30 years warranty! EXECUTIVE glossy aluminum-polyurethane 3D car sticker. Attantion!!! Size!!! 4.29″x0.47″ (109×12 mm), thickness 0.02” (0.5 mm). Image warranty 30 years in corrosive environment and climatic conditions including UV light. On the reverse side applied with 3M 468MP adhesive tape. Coating with polyurethane resin to protect the glossy surface of the aluminum from scratches. Attention! Glue only at positive temperature (not less than +10 C), on a dry, clean and degreased surface.
Alstickers! 30 Years Warranty! 3D Aluminum-Polyurethane car Sticker Platinum Glossy, Size 4.13″x0.47″ (105×12 mm), Thickness 0.02″ (0.5 mm).
Alstickers! 30 Years Warranty! 3D Aluminum-Polyurethane car Sticker Platinum Glossy, Size 4.13″x0.47″ (105×12 mm), Thickness 0.02″ (0.5 mm). ₽ 700.00
-
₽ 700.00Add to cart
Alstickers! 30 Years Warranty! 3D Aluminum-Polyurethane car Sticker Platinum Glossy, Size 4.13″x0.47″ (105×12 mm), Thickness 0.02″ (0.5 mm).
Alstickers! 30 Years Warranty! 3D Aluminum-Polyurethane car Sticker Platinum Glossy, Size 4.13″x0.47″ (105×12 mm), Thickness 0.02″ (0.5 mm). ₽ 700.00Alstickers! 30 years warranty! PLATINUM glossy aluminum-polyurethane 3D car sticker. Attantion!!! Size!!! 4.13″x0.47″ (105×12 mm), thickness 0.02” (0.5 mm). Image warranty 30 years in corrosive environment and climatic conditions including UV light. On the reverse side applied with 3M 468MP adhesive tape. Coating with polyurethane resin to protect the glossy surface of the aluminum from scratches. Attention! Glue only at positive temperature (not less than +10 C), on a dry, clean and degreased surface.
Alstickers! 30 Years Warranty! 3D Aluminum-Polyurethane car Sticker Platinum Glossy, Size 4.13″x0.47″ (105×12 mm), Thickness 0.02″ (0.5 mm).
Alstickers! 30 Years Warranty! 3D Aluminum-Polyurethane car Sticker Platinum Glossy, Size 4.13″x0.47″ (105×12 mm), Thickness 0.02″ (0.5 mm). ₽ 700.00
-
₽ 700.00Add to cart
Alstickers! 30 Years Warranty! 3D Aluminum-Polyurethane car Sticker Platinum Glossy, Size 4.13″x0.47″ (105×12 mm), Thickness 0.02″ (0.5 mm).
Alstickers! 30 Years Warranty! 3D Aluminum-Polyurethane car Sticker Platinum Glossy, Size 4.13″x0.47″ (105×12 mm), Thickness 0.02″ (0.5 mm). ₽ 700.00Alstickers! 30 years warranty! PLATINUM glossy aluminum-polyurethane 3D car sticker. Attantion!!! Size!!! 4.13″x0.47″ (105×12 mm), thickness 0.02” (0.5 mm). Image warranty 30 years in corrosive environment and climatic conditions including UV light. On the reverse side applied with 3M 468MP adhesive tape. Coating with polyurethane resin to protect the glossy surface of the aluminum from scratches. Attention! Glue only at positive temperature (not less than +10 C), on a dry, clean and degreased surface.
Alstickers! 30 Years Warranty! Old Logo Volvo Glossy Aluminum-Polyurethane car 3D Sticker Size 3.8″x1.93″ (97×49 mm), Thickness 0.02″.
Alstickers! 30 Years Warranty! Old Logo Volvo Glossy Aluminum-Polyurethane car 3D Sticker Size 3.8″x1.93″ (97×49 mm), Thickness 0.02″. ₽ 900.00
-
₽ 900.00Add to cart
Alstickers! 30 Years Warranty! Old Logo Volvo Glossy Aluminum-Polyurethane car 3D Sticker Size 3.8″x1.93″ (97×49 mm), Thickness 0.02″.
Alstickers! 30 Years Warranty! Old Logo Volvo Glossy Aluminum-Polyurethane car 3D Sticker Size 3.8″x1.93″ (97×49 mm), Thickness 0.02″. ₽ 900.00OLD LOGO VOLVO glossy aluminum-polyurethane 3D car sticker size 3.8″x1.93″ (97×49 mm), thickness 0.02″. (0.5 mm). Image warranty 30 years in corrosive environment and climatic conditions including UV light. On the reverse side applied with 3M 468MP adhesive tape. Attention! Glue only at positive temperature (not less than +10 C), on a dry, clean and degreased surface.
Alstickers! 30 Years Warranty! Pasting in the logo on the steering wheel of VOLVO R, car sticker semi-matt aluminum, size 70×9. 8 mm, with two holes, 0.5 mm thick aluminum. Attention! Not the original. Blue.
Alstickers! 30 Years Warranty! Pasting in the logo on the steering wheel of VOLVO R, car sticker semi-matt aluminum, size 70×9. 8 mm, with two holes, 0.5 mm thick aluminum. Attention! Not the original. Blue. ₽ 600.00
-
₽ 600.00Add to cart
Alstickers! 30 Years Warranty! Pasting in the logo on the steering wheel of VOLVO R, car sticker semi-matt aluminum, size 70×9. 8 mm, with two holes, 0.5 mm thick aluminum. Attention! Not the original. Blue.
Alstickers! 30 Years Warranty! Pasting in the logo on the steering wheel of VOLVO R, car sticker semi-matt aluminum, size 70×9. 8 mm, with two holes, 0.5 mm thick aluminum. Attention! Not the original. Blue. ₽ 600.00Pasting in the original place on the steering wheel of the VOLVO R logo, car sticker semi-Matt aluminum 70×9. 8 mm, aluminum thickness 0.5 mm. The image is guaranteed for 30 years in aggressive environments and climatic conditions, including ultraviolet radiation. The reverse side is covered with 3M 468mp adhesive tape. Attention! Stick only at a positive temperature of at least +10C, on a dry, clean and fat-free surface.